FEATURES
This armor-style protective case is designed for buyers sourcing rugged iPhone Cases with an integrated stand and stronger physical coverage than a basic slim shell. The primary material is PC, and a concealed rear stand folds into the armor-style body.
The armor-style body combines a rigid protective profile, reinforced perimeter and integrated rear stand. Confirm the cushioning configuration on the approved sample. Raised camera and screen edges, non-slip side detailing and the concealed rear stand make the product particularly suitable for practical, sport-oriented and heavy-duty retail ranges.
Buyers looking for additional protection-focused designs can also browse our Shockproof Phone Cases collection.
Core Specifications
| 01. Model No. | PGK-ZJ015 |
|---|---|
| 02. Primary Material | PC |
| 03. Product Type | Armor Shockproof Phone Case |
| 04. Main Function | Shock Protection |
| 05. Support Type | Hidden Kickstand |
| 06. Design Style | Armor / Rugged / Sport |
| 07. Camera Protection | Raised Camera Surround |
| 08. Screen Protection | Raised Front Edge |
| 09. Colors | Purple / pink shown; confirm other combinations |
| 10. Place of Origin | Guangdong, China |
Key Features & Buyer Benefits
Hidden Kickstand
The stand is integrated into the rear structure and stays visually unobtrusive when folded, providing hands-free viewing without adding a large external bracket.
Armor-Style Protection
The hard PC body and sample-approved cushioning components create a more substantial protective structure for buyers targeting rugged accessory ranges.
Raised Camera & Screen Edges
Raised perimeter structures create additional clearance between exposed phone surfaces and desks or other flat contact areas.
Two-Tone Finish
The purple body and pink accents give the armor design a two-tone appearance. Confirm other available color combinations and quantities before planning an assortment.
Integrated Hidden Kickstand
The hidden kickstand folds into the rear body when not in use. Unlike a large external ring or exposed bracket, the support element is designed to remain integrated into the case body when closed.
This makes the case appropriate for buyers wanting hands-free viewing functionality while keeping a relatively clean rear profile. Exact support angle, hinge resistance and cycle life are not provided in the version specification, so those properties should be verified on the sample.
Multi-Layer Protective Structure
PC is the primary material. The component-arrangement image illustrates the shell, frame and concealed stand; verify the actual cushioning materials and component fit on the approved sample.
Do not infer carbon-fiber material, polymer grades or hidden layer thickness from the illustrated texture. Specify any required cushioning material in the approved production specification.
01. Hard PC Back
Rigid rear structure for shape retention and everyday impact protection.
02. Hard PC Bumper
Check the rigid perimeter frame on the approved sample.
03. Soft EVA
Confirm EVA cushioning material and placement on the approved sample.
04. Soft Rubber Layer
Confirm rubber components and their position on the selected version.
Raised Camera & Screen Protection
The dimensional references for protective clearance are: approximately 0.10 inch around the camera area and 0.04 inch around the screen edge.
Converted for easier comparison, these correspond to approximately 2.5 mm and 1.0 mm respectively. The raised structures help reduce direct contact when the phone is placed camera-down or screen-down on a flat surface.
Non-Slip Side Details & Open Speaker Area
Check the perimeter texture, side controls and speaker opening on the selected mold. These details are designed to improve everyday handling while maintaining direct access to the phone’s ports and speaker area.
The exact surface texture may vary between phone molds, so buyers should verify the selected model before approving product photography or retail packaging artwork.
Triple-Defense Shock Protection
“Triple-Defense” describes the armor design and its protective positioning; it is not an independent test standard. The reinforced body, raised edges and sample-approved softer cushioning components together create a layered approach to everyday impact protection.
No military-grade certification or quantified drop rating is claimed. Request a report identifying the exact case version, method, sample count and acceptance criteria if tested performance is required.
For buyers requiring documented impact performance, the correct approach is to request the applicable test report before including any quantified drop claim in retail packaging or marketplace listings.
Compatible iPhone Models
Separate model-specific molds support this armor-style range. Separate iPhone 17 molds are available; ask about other generations and approve each model independently.
| 01. iPhone 17 | Separate mold; confirm current availability |
|---|---|
| 02. iPhone 17 Pro | Separate Pro mold; confirm camera and button layout |
| 03. iPhone 17 Air | Separate mold; confirm current availability |
| 04. iPhone 17 Pro Max | Separate mold; confirm current availability |
| 06. iPhone 16 Series | iPhone 16 / 16 Pro / 16 Plus / 16 Pro Max shown |
| 07. Additional Models | Additional model variants are available; current mold availability should be confirmed |
Color and Finish Approval
The pictured finish pairs a purple body with pink accents. Confirm the exact commercial color, finish and other available combinations when requesting a quotation.
| Appearance shown | Purple body / pink accents |
|---|---|
| Color approval | Approve a physical color sample under normal lighting |
| Other combinations | Confirm current availability and quantities per model |
| Branding | Check logo position and process feasibility without obstructing stand movement |
Hidden Kickstand Armor Case vs. Basic PC Case
| Buyer Consideration | This Armor Case | Basic PC Case |
|---|---|---|
| Primary Structure | Rigid PC with sample-approved cushioning components | Usually simpler rigid shell |
| Kickstand | Integrated hidden stand | Usually none |
| Camera Clearance | Raised protective surround | Depends on design |
| Grip Detail | Specified non-slip stripes | Depends on shell finish |
| Positioning | Rugged / Armor / Functional | Basic Everyday Protection |
For a different protective construction in the same series, compare our magnetic soft-touch TPU + PC case for iPhone 17 Series. Its magnetic features and material combination are separate from this hidden-stand armor design.
Buyer Technical Notes
- PC is the confirmed primary material. Any EVA or rubber cushioning configuration must be confirmed in the approved production specification.
- The hidden kickstand is confirmed in the specification. Exact viewing angle and hinge-cycle durability are not specified.
- The design uses a “Triple Defence” product concept. This describes the layered protection positioning and should not be confused with an independently certified impact standard.
- No military-grade certification is claimed. Obtain a product-specific report before using a test-based protection claim.
- The camera-clearance reference is approximately 0.10 inch; verify the selected mold. This is approximately 2.5 mm.
- The screen-edge reference is approximately 0.04 inch; verify with the intended screen protector. This is approximately 1.0 mm.
- “360° Full Protection” is interpreted as full-perimeter physical coverage. It is not used as a test or certification rating.
- Multiple iPhone variants are available. Camera geometry, case dimensions and stand structures should be verified by model before mass production.
- The package reference is 20 × 10 × 1.5 cm with approximately 0.05 kg gross weight. Reconfirm these values by mold if freight calculation is critical.
Wholesale Product Information
For branding or retail-packaging requirements, review our phone case OEM/ODM services and confirm the feasible options for the selected armor-case mold.
| 01. Product Name | Armor Triple-Defense Hidden Kickstand Shockproof Case for iPhone 17 Series |
|---|---|
| 02. Model No. | PGK-ZJ015 |
| 03. Product Type | Armor Shockproof Kickstand Phone Case |
| 04. Primary Material | PC |
| 05. Shown Cushioning | Confirm EVA / rubber components for the selected version |
| 06. Main Function | Shock Protection |
| 07. Support Type | Hidden Kickstand |
| 08. Camera Protection | Raised Camera Surround — reference approx. 0.10 in / 2.5 mm |
| 09. Screen Protection | Raised Screen Edge — reference approx. 0.04 in / 1.0 mm |
| 10. Design Style | Armor / Rugged / Sport |
| 11. Primary Series | iPhone 17 Series |
| 12. Additional Models | Other model-specific molds: confirm availability separately |
| 13. Colors | Multiple Two-Tone Color Combinations |
| 14. Selling Unit | Single Item |
| 15. Package Size | 20 × 10 × 1.5 cm |
| 16. Gross Weight | Approx. 0.05 kg |
| 17. MOQ | Confirm for the selected version and order quantity |
| 18. Standard Packaging | Confirm for the selected version and order quantity |
| 19. Place of Origin | Guangdong, China |
Current MOQ, stock by model/color, packaging configuration and any test-document requirements should be reconfirmed before purchase. Contact Kejie for current production specifications and quotation →
Before Bulk Ordering
Confirm the following information before sample approval or mass production:
- Exact iPhone model: confirm model generation, camera opening and corresponding armor-case mold.
- Color combination: provide the required color and quantity for each SKU.
- Stand function: verify support angle and stability on the selected model.
- Camera clearance: reconfirm the raised camera structure if dimensional clearance is critical.
- Screen clearance: verify front-edge height with the intended screen protector if one will be used.
- Protection testing: request the actual test report if military-grade or quantified drop performance is required for marketing.
- Material construction: confirm the PC and softer cushioning components on the approved production sample.
- MOQ: request the current standard and customized-order MOQ.
- Packaging: confirm standard or custom retail packaging.
- Delivery: provide quantity, destination and required delivery date.
Product FAQ
01. What is the main material of this armor case?
PC is the primary material. Confirm any additional cushioning components on the approved sample and production specification.
02. Does this case have a built-in stand?
Yes. The current product attributes identify a hidden kickstand integrated into the case structure.
03. Which iPhone models are available?
Separate molds are required for iPhone 17, 17 Pro, 17 Air and 17 Pro Max. Confirm the selected camera opening, dimensions and current availability; one shell does not fit all series models. Ask separately about other generations.
04. How much does the camera edge protrude?
The camera-edge reference is approximately 0.10 inch, or 2.5 mm. Confirm the actual clearance and tolerance on the selected mold before using this value in a retail specification.
05. How high is the screen edge?
The front-edge reference is approximately 0.04 inch, or 1.0 mm. Verify it on the sample with the intended screen protector.
06. Is this case military-grade certified?
No military-grade certification is claimed. If your market requires tested impact performance, request a report covering the selected case version and the relevant test conditions.
07. What does 360° protection mean?
It refers to full-perimeter physical coverage around the device. It is not treated as a certification or quantitative protection score.
08. What colors are available?
The product images show a purple body with pink accents. Confirm the exact commercial color, current availability and other combinations in the quotation.
09. What are the MOQ and packaging options?
MOQ and standard packaging should be confirmed for the selected model, order quantity and customization requirements.
Request a Quote
For an accurate quotation, please provide:
- Exact iPhone model(s)
- Quantity per model and color
- Required color combinations
- Hidden-stand requirements
- Required camera and screen clearance
- Any drop-test documentation requirements
- Logo or private-label requirements
- Packaging requirements
- Sample requirement
- Delivery destination and target date
English 
Español de Argentina 
Русский 
Italiano 
日本語 
한국어 
العربية 
Français 
Deutsch